The effente handheld on a steel workbench beside its sensor head and a small demo conveyor, lit in red
/ Handheld machine check · No cloud

Listen before it breaks.

effente is a handheld that feels, hears and sees a machine. It learns what normal looks like, then tells you in plain words when something changes. Nothing leaves your site.

Rendered from our CAD. The prototype is 3D printed.

67%

of factories have an unplanned outage at least once a month

$125,000

average cost of one hour of downtime, across plants of all sizes

80%+

of a factory's machines have no sensor watching them

Sources: ABB Value of Reliability 2023, survey of 3,215 plants. Machine shares: Reliability Magazine asset-criticality guide (a guideline, not a survey).

Critical machines Drag to rotate

An example floor, not a real site.

/ The gap

Most machines are checked by nobody, until they stop.

  1. / Critical · 10–20% of machinesMain drive motor, bottleneck press, main air compressor.

    • Checked by: sensors, 24/7
  2. / Important · 30–40% of machinesRobot cells, packaging machines, branch conveyor motors.

    • Checked by: handheld rounds
    • effente fits here
  3. / Everything else · 50–60% of machinesConveyor rollers, small gear motors, belts and small pumps.

    • Checked by: nobody, until it breaks
    • effente fits here
/ How it works

One press to check a machine.

The handheld, its magnetic sensor head, and the small conveyor we test on.

/ 01 · Sensor head

Snap the head on any machine.

A magnetic sensor head with a vibration sensor. No wiring, no install. It docks on the handheld when you are done.

/ 02 · Thermal camera and microphone

It feels, hears and sees.

Vibration from the head, a microphone for grinding and rattle, a thermal camera for hot spots. Most handhelds read vibration only.

/ 03 · On-board computer

It learns that machine's normal.

A ready model for each machine type, tuned in minutes from normal running only. The AI runs on the board inside, so it needs no internet.

/ 04 · Screen and scan button

The answer, in plain words.

One button to scan. The screen says what looks wrong and which reading moved. Patterns it has not seen are flagged "inspect".

Rendered from our CAD. Electronics simplified.

effente desktop app showing an alarm titled Something is wrong, with signal readings, a vibration spectrum and a thermal image
Screenshot with simulated data.
/ The desktop app

Every machine, on your own laptop.

When something changes, it says what is wrong in plain words and shows the reading that moved.

  • Live status, spectrum and thermal view
  • History and a log for every part
  • Maintenance reports written on your laptop
  • A phone app to scan a part on the line

No cloud. No account. Nothing sent out.

The AI runs on the device. Your machine data stays in your building, on hardware you own.

Small and mid-size factories

You can't justify a sensor on every roller and gear motor. One handheld covers the machines nobody is watching.

Maintenance contractors

One device across every client site. Bought once, no per-machine fee, and it learns each machine it meets.

Sites that can't use the cloud

Defense, biomedical and pharma, remote sites, secret processes. Nothing is uploaded, so there is nothing to approve.

Early results, stated honestly.

Tested on public recordings of a conveyor under three loads, in a quiet room and with factory noise mixed in.

94.9%

of 4,798 faults caught
150 false alarms in 2,992 normal clips (5%)

/ Light load
95.1%
Quiet room90.6%
Factory noise99.6%
/ Medium load
98.9%
Quiet room97.9%
Factory noise99.9%
/ Heavy load
90.6%
Quiet room99.1%
Factory noise, our hardest case82.1%

Bars start at 80%.

/ What this does not show yet

This test used sound only, on public recordings of one conveyor (SSCC, arXiv 2603.07130). It has not been independently checked, and we have not tested on a customer's floor. Fault names are shown as "possible" until we confirm them on real faults. That is why we want to talk to you.

What factories use today.

Three ways to check a machine, and where effente sits between them.

Feature By ear and by hand Handheld testers A sensor on every machine effente
Cost$0~$14,000 once$300–500 per machine, per year~$8,500 once
Machines it coversEverything elseImportantCriticalImportant and everything else
What it sensesSound, touchVibration; some add moreVibration, heat, ultrasoundVibration, sound, heat
How it decidesExperienceFixed rulesAI, mostly in their cloudLearns each machine, on the device
Data stays on siteYesYesNoYes
Watches 24/7NoNoYesNo, spot checks

Handheld tester price: list price of a leading vibration tester. Sensor price: vendor rates of about $26–35 per sensor per month. Checked November 2026.

Buy it once. Own it.

This is our target price, not a quote. Tell us on the call whether it is right for your budget.

/ Hardware
$8,000

the handheld and sensor head, one time

/ Software
$500

desktop and phone apps, one-time purchase

/ Subscription
$0

no monthly fee, no per-machine fee

/ 15 minutes · No sales pitch

Tell us how you check your machines.

We are a working prototype with nothing to sell you yet. We want to learn whether this would be useful on your floor, and what would stop you from using it.

/ What we'll ask
  • Which machines fail on you, and how you find out
  • What you use today, and what it costs you
  • Whether your site allows cloud tools
/ Book a call
  • 15 minutes, by video or phone
  • You get a calendar invite right away
  • Nothing to prepare
Pick a time

Opens our scheduling page in a new tab.